New RZV replica main harness and connectors (group purchase)

RZVTokyo · **Posted:** Mon Mar 14, 2016 6:46 am

Hi Steen,

I did receive the photos. I'll check with the shop when I go there on the 25th. I'll keep you posted.

Shayne

Twinsport · **Posted:** Fri Apr 01, 2016 5:14 pm

Shayne,

RZVTokyo wrote:

... I'll keep you posted.

Not only did you do that - you got all the connectors I needed for the RD500 and for my kids Yamaha mopeds.

It's excellent! Just excellent!

For those of you curious to see the RD plugs, please have a look:

Thanks a bunch!

/Steen

rubberfingers · **Posted:** Tue May 24, 2016 7:05 pm

Hi is it possible to get the ypvs controller connector on its own?

Thanks

Andy

RZVTokyo · **Posted:** Fri May 27, 2016 3:33 am

Hi Andy,

Are you looking for the YPVS controller side of the connector only or do you want the harness side as well?

Shayne

rubberfingers · **Posted:** Fri May 27, 2016 3:36 am

Hi

I just need the ypvs controller plug side. Been after one for years a used one would do.

Thanks

Andy

RZVTokyo · **Posted:** Fri May 27, 2016 3:41 am

The shop has new ones available. I should be able to get you 1ea of the YPVS connector. Do you also need the pins?

Shayne

rubberfingers · **Posted:** Fri May 27, 2016 7:05 am

Yes please I need the pins to make a complete connector to attach to the loom

Eazy_ways · **Posted:** Sun Nov 27, 2016 12:53 am

Hi, are these still available? Or does anybody have a contact for the connector kits?
Cheers

RZVTokyo · **Posted:** Sun Nov 27, 2016 9:55 pm

The connector kits are usually sold with the harnesses. I'll ask the shop if they'll sell another connector kit alone. I was able to purchase a few extra connector sets the last time I made an order for two harnesses.

Eazy_ways · **Posted:** Mon Nov 28, 2016 4:45 am

RZVTokyo wrote:

The connector kits are usually sold with the harnesses. I'll ask the shop if they'll sell another connector kit alone. I was able to purchase a few extra connector sets the last time I made an order for two harnesses.

Thanks
Could you find out the cost of the harness too?
Thanks again.

torp68 · **Joined:** Thu May 19, 2016 10:55 am **Posts:** 26

Hi

I see above there are folks reporting interest in an RD500 harness. Has this been replicated?

Would be VERY interested in a new harness for my newly restored RD.
Feels awful to put that oily, butchered mess back onto the repainted frame..... :???:

Oyvind

Paulrs · **Posted:** Mon Mar 27, 2017 5:57 pm

Also interested in an RD500 loom if available.

Paul

Racer · **Joined:** Fri Oct 29, 2010 5:43 pm **Posts:** 73

RZVTokyo wrote:

The shop has new ones available. I should be able to get you 1ea of the YPVS connector. Do you also need the pins?

Shayne

Hello Shayne

I need the YPVS connector With pins. It is at the YPVS Controller side, not the loom side.
Can you supply this?

Racer

Smoker · **Joined:** Sat Jun 14, 2008 7:16 am **Posts:** 1066

I'll need a custom harness, but not sure when that will be.

Perhaps I should just buy an RZ500 connector set, just to be safe.

Could I get the info, if there's another purchase?

Thanks, again.

Racer · **Joined:** Fri Oct 29, 2010 5:43 pm **Posts:** 73

torp68 wrote:

Hi

I see above there are folks reporting interest in an RD500 harness. Has this been replicated?

Would be VERY interested in a new harness for my newly restored RD.
Feels awful to put that oily, butchered mess back onto the repainted frame..... :???:

Oyvind

PM sent

Racer

500 Two-Stroke Tech

New RZV replica main harness and connectors (group purchase)

Who is online