Hi,
I've just purchased a Brembo Replacement Rear Disc 68B407C9 - however the bolt holes are 6mm diameter - Is this a mistake ? - I'm sure the disc should have 8mm holes ?
Any advice on this appreciated.
Thanks.
Cheers
Paul
Brembo Replacement Rear Disc 68B407C9
Moderator: rztom
- jackson.40
- *****
- Posts: 2328
- Joined: Fri Dec 30, 2005 7:01 pm
- Location: Cambridge,UK
Re: Brembo Replacement Rear Disc 68B407C9
Hi Paul
I just had a look and they don't list a rear disc.(see link)
http://www.carpimoto.it/Images/Products ... k_2016.pdf" onclick="window.open(this.href);return false;
I just had a look and they don't list a rear disc.(see link)
http://www.carpimoto.it/Images/Products ... k_2016.pdf" onclick="window.open(this.href);return false;
Re: Brembo Replacement Rear Disc 68B407C9
If the rest matches, use a drill to make it match fully ...
Bye
Martin
Martin
Re: Brembo Replacement Rear Disc 68B407C9
Hi Steve, Martin,
Thanks for the info.
Bike Torque Racing in the UK list this disc for the RD500 - I think some ebay sellers have listed it as well. However difinitely wrong since the PDF doesn't show a RD500 rear fitment. So it looks like Bike Torque Racing are wrong rather than Brembo.
As you suggested Martin I have drilled the holes out to 8mm and the disc now fits perfectly.
Thanks.
Cheers
Paul
Thanks for the info.
Bike Torque Racing in the UK list this disc for the RD500 - I think some ebay sellers have listed it as well. However difinitely wrong since the PDF doesn't show a RD500 rear fitment. So it looks like Bike Torque Racing are wrong rather than Brembo.
As you suggested Martin I have drilled the holes out to 8mm and the disc now fits perfectly.
Thanks.
Cheers
Paul