RZV500R using Ivans Performance Jet KIt etc

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
7portfan
- - - - -
- - - - -
Posts: 17
Joined: Sun May 03, 2015 7:46 am
Location: East Sussex UK

RZV500R using Ivans Performance Jet KIt etc

#1 Post by 7portfan » Tue Oct 30, 2018 7:46 pm

I finally got around to treating my deristricted RZV to an Ivans Performance Products Jet Kit (along with New OEM Replica Emulsion tubes that Ivan has had remanufactured) and have been amazed at the improved throttle response at low to mid throttle openings. As my bike has the stock air box and 47x pipes fitted, I used the 'A 'needles as recommended and followed his carb set up guide for a stock bike. It now runs like a different bike, and has a load of mid range power that didn't exist with the previous jetting. The bike runs cleanly (compared to before) at low rpm, and fuel consumption has improved markedly too and with mixed road riding it returns 35-38 mg as opposed to the low 20's when I first bought it 4 years ago.

Going forwards I hope to fit a set of Lomas pipes and will report how I get on with the B needles etc at that time.

Regards Mart

2manyprjx
Posts: 150
Joined: Wed Nov 28, 2007 7:12 am
Location: Anderson, Indiana

Re: RZV500R using Ivans Performance Jet KIt etc

#2 Post by 2manyprjx » Fri Nov 02, 2018 11:49 pm

They are a great kit. Anyone with stock carbs/intake should really get one.
RZ500
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine

Linx
Posts: 169
Joined: Fri Jul 28, 2017 4:23 pm
Location: Stratford Upon Avon UK

Re: RZV500R using Ivans Performance Jet KIt etc

#3 Post by Linx » Sat Nov 03, 2018 5:24 am

How much are they charging for emulsion tubes?

Sent from my HTC Desire 530 using Tapatalk
:smt006 Current Bikes
1984 47X RD500LC, 2018 Triumph Speed Triple RS, 1999 Honda CB600F Hornet
Past Bikes Include
RD250LC, RD350YPVS LC2 Race Bike, RD350F2, 1976 CB400F

Post Reply