Page 1 of 1

Servo cable connection

Posted: Mon Aug 06, 2018 5:43 pm
by Teddy Nutkins
Good evening guys,
After a couple of bereavements and family problems over the last year I’ve finally got around to starting the restoration of my RD500. I photographed the strip down in some detail however one thing that was missing was the servo cables. Having sourced a set now could somebody confirm which cable goes from each of the pulley connections to the servo. Possibly a daft question for some but I do not have any reference for this and any help would be appreciated.

Cheers

Teddy

Re: Servo cable connection

Posted: Mon Aug 06, 2018 11:20 pm
by silverstrom
Just follow the numbers. #1 and #2 on both ends.

Re: Servo cable connection

Posted: Tue Aug 07, 2018 7:59 am
by Teddy Nutkins
Thanks for your quick response John, makes sense when you but it like that. One thing that has been mentioned is that the servo cables are coloured one with black end and one with white. As there is no discernible colour on my cables is there anyway to distinguish which cable is which.

Thanks again

Teddy