Servo cable connection

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
Teddy Nutkins
Posts: 3
Joined: Tue Oct 24, 2017 3:04 pm

Servo cable connection

#1 Post by Teddy Nutkins » Mon Aug 06, 2018 5:43 pm

Good evening guys,
After a couple of bereavements and family problems over the last year I’ve finally got around to starting the restoration of my RD500. I photographed the strip down in some detail however one thing that was missing was the servo cables. Having sourced a set now could somebody confirm which cable goes from each of the pulley connections to the servo. Possibly a daft question for some but I do not have any reference for this and any help would be appreciated.

Cheers

Teddy

silverstrom
- - - - -
- - - - -
Posts: 3236
Joined: Sat Feb 04, 2012 7:36 am

Re: Servo cable connection

#2 Post by silverstrom » Mon Aug 06, 2018 11:20 pm

Just follow the numbers. #1 and #2 on both ends.

Teddy Nutkins
Posts: 3
Joined: Tue Oct 24, 2017 3:04 pm

Re: Servo cable connection

#3 Post by Teddy Nutkins » Tue Aug 07, 2018 7:59 am

Thanks for your quick response John, makes sense when you but it like that. One thing that has been mentioned is that the servo cables are coloured one with black end and one with white. As there is no discernible colour on my cables is there anyway to distinguish which cable is which.

Thanks again

Teddy

Post Reply