Carb breathers

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
Webs
Posts: 15
Joined: Wed Dec 30, 2015 2:10 pm
Location: Exmouth devon

Carb breathers

#1 Post by Webs » Mon Jul 23, 2018 5:26 pm

Hi im connecting carb breathers. Do the left and right banks of carb breathers connect at the top t piece connector ? Then where does it go or connect too ?

Linx
Posts: 169
Joined: Fri Jul 28, 2017 4:23 pm
Location: Stratford Upon Avon UK

Re: Carb breathers

#2 Post by Linx » Mon Jul 23, 2018 5:32 pm

One end connects the the carb breather spigot. The other end doesn't connect to anything. They just loop over and a cable tie holds them in place.Image

Sent from my HTC Desire 530 using Tapatalk
:smt006 Current Bikes
1984 47X RD500LC, 2018 Triumph Speed Triple RS, 1999 Honda CB600F Hornet
Past Bikes Include
RD250LC, RD350YPVS LC2 Race Bike, RD350F2, 1976 CB400F

Webs
Posts: 15
Joined: Wed Dec 30, 2015 2:10 pm
Location: Exmouth devon

Re: Carb breathers

#3 Post by Webs » Mon Jul 23, 2018 6:35 pm

Is that the pipes that connect to the t pieces that come out of the carbs ?

Webs
Posts: 15
Joined: Wed Dec 30, 2015 2:10 pm
Location: Exmouth devon

Re: Carb breathers

#4 Post by Webs » Mon Jul 23, 2018 6:51 pm

Sorry think they might be balance pipes im on about

Linx
Posts: 169
Joined: Fri Jul 28, 2017 4:23 pm
Location: Stratford Upon Avon UK

Re: Carb breathers

#5 Post by Linx » Tue Jul 24, 2018 2:52 am

The only T piece I can think of is on the fuel pipe. No balance pipes [emoji848].

Sent from my HTC Desire 530 using Tapatalk
:smt006 Current Bikes
1984 47X RD500LC, 2018 Triumph Speed Triple RS, 1999 Honda CB600F Hornet
Past Bikes Include
RD250LC, RD350YPVS LC2 Race Bike, RD350F2, 1976 CB400F

Post Reply