Inlet rubbers

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
Kev Rev
Posts: 27
Joined: Thu Nov 24, 2016 6:10 am

Inlet rubbers

#1 Post by Kev Rev » Mon Jan 15, 2018 4:12 am

Anyone got these off EBay?? If so are they any good?

User avatar
jackson.40
*****
*****
Posts: 2328
Joined: Fri Dec 30, 2005 7:01 pm
Location: Cambridge,UK

Re: Inlet rubbers

#2 Post by jackson.40 » Mon Jan 15, 2018 7:07 am

Here is the link to them.....................

https://www.ebay.co.uk/itm/Carburettor- ... SwlaVZk04V" onclick="window.open(this.href);return false;

silverstrom
- - - - -
- - - - -
Posts: 3236
Joined: Sat Feb 04, 2012 7:36 am

Re: Inlet rubbers

#3 Post by silverstrom » Mon Jan 15, 2018 7:37 am

Or here for much less $$ https://www.aliexpress.com/item/Carb-In ... autifyAB=0" onclick="window.open(this.href);return false;

Linx
Posts: 169
Joined: Fri Jul 28, 2017 4:23 pm
Location: Stratford Upon Avon UK

Re: Inlet rubbers

#4 Post by Linx » Tue Jan 16, 2018 9:11 am

silverstrom wrote:Or here for much less $$ https://www.aliexpress.com/item/Carb-In ... autifyAB=0" onclick="window.open(this.href);return false;
That's good to know. Thanks for that [emoji106].

Sent from my HTC Desire 530 using Tapatalk
:smt006 Current Bikes
1984 47X RD500LC, 2018 Triumph Speed Triple RS, 1999 Honda CB600F Hornet
Past Bikes Include
RD250LC, RD350YPVS LC2 Race Bike, RD350F2, 1976 CB400F

2manyprjx
Posts: 150
Joined: Wed Nov 28, 2007 7:12 am
Location: Anderson, Indiana

Re: Inlet rubbers

#5 Post by 2manyprjx » Sat Jan 27, 2018 6:19 am

I bought a set of those and I'm happy with them. Very nice. You can't use the original crossover tubes because they didn't mold in the groove for the bead on the tube but mine came with new tubes with no bead. They even have the correct spots molded in to position the carbs clamps.
RZ500
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine

Post Reply