47X-16385-00 RING, clutch, boss - Wire Gauge ??

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
rd84
- - - - -
- - - - -
Posts: 1618
Joined: Thu Nov 17, 2005 7:12 am
Location: Leicestershire, UK

47X-16385-00 RING, clutch, boss - Wire Gauge ??

#1 Post by rd84 » Thu Sep 14, 2017 7:30 pm

Hi,

Can anyone tell me what gauge wire I need to replace the strangely named "47X-16385-00 RING, clutch, boss"

Also is stainless wire ok or must it be an high tensile wire ?

Thanks.

Cheers
Paul

User avatar
tacky1
Posts: 1248
Joined: Mon Sep 14, 2015 12:30 pm
Location: Bay Area. CA.

Re: 47X-16385-00 RING, clutch, boss - Wire Gauge ??

#2 Post by tacky1 » Thu Sep 14, 2017 8:53 pm

I usually leave it out and replace the half plate with a full plate, Any reason why you want to refit it..
1985 RZv500
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo

rd84
- - - - -
- - - - -
Posts: 1618
Joined: Thu Nov 17, 2005 7:12 am
Location: Leicestershire, UK

Re: 47X-16385-00 RING, clutch, boss - Wire Gauge ??

#3 Post by rd84 » Fri Sep 15, 2017 8:30 am

tacky1 wrote:I usually leave it out and replace the half plate with a full plate, Any reason why you want to refit it..
Hi,

I suppose not knowing any better I would be nervous of doing the job non-standard - I don't even know why that plate is different and why it is held in place by the wire ?

I guess you've ran without this plate and wire with no problems ?

Thanks.

Cheers
Paul

User avatar
WVWRZ500N
- - - - -
- - - - -
Posts: 967
Joined: Sat Nov 19, 2005 1:15 am
Location: Lee's Summit, MO
Contact:

Re: 47X-16385-00 RING, clutch, boss - Wire Gauge ??

#4 Post by WVWRZ500N » Mon Sep 18, 2017 5:49 pm

The back plate is there so the 1st friction doesn't ride on the aluminum on the hub.

Best I can recall the wire is the same as the R1 wire which can be ordered unlike the RZ wire. PN: 2H7-16385-00-00
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com

rd84
- - - - -
- - - - -
Posts: 1618
Joined: Thu Nov 17, 2005 7:12 am
Location: Leicestershire, UK

Re: 47X-16385-00 RING, clutch, boss - Wire Gauge ??

#5 Post by rd84 » Mon Sep 18, 2017 11:20 pm

Thanks very much Bill

Cheers
Paul

Post Reply