SRX250 Fuel petcock
Moderator: rztom
-
- Posts: 60
- Joined: Wed Jul 12, 2017 3:34 pm
- Location: Virginia
SRX250 Fuel petcock
It appears that the srx250 petcock (51Y-24500-01-00) is the same as the 500 petcock (47X-24500-01-00). Is this correct. Same number sequence except for the 47X vs the 51Y. It looks like it has the same/similar fittings...... Anyone else check this out?
Last edited by thumper580 on Sun Aug 13, 2017 11:47 am, edited 1 time in total.
- Mike Cichetti
- - - - - -
- Posts: 390
- Joined: Sat Nov 19, 2005 5:58 pm
- Location: Pa
Re: SRX250 Fuel petcock
Petcock is the same but outlet is smaller. I swapped it out with the one from my old leaking one.
-
- Posts: 60
- Joined: Wed Jul 12, 2017 3:34 pm
- Location: Virginia
Re: SRX250 Fuel petcock
Mike, so you are using the SRX petcock?? or did you pull the guts out of it to repair the 500 petcock. If you are using the SRX petcock, does it flow enough fuel?Mike Cichetti wrote:Petcock is the same but outlet is smaller. I swapped it out with the one from my old leaking one.
Thanks.
- Mike Cichetti
- - - - - -
- Posts: 390
- Joined: Sat Nov 19, 2005 5:58 pm
- Location: Pa
Re: SRX250 Fuel petcock
I removed the outflow pipe from the SRX and used the outflow from my old petcock. It's a press fit.
-
- Posts: 60
- Joined: Wed Jul 12, 2017 3:34 pm
- Location: Virginia
Re: SRX250 Fuel petcock
Thanks!!Mike Cichetti wrote:I removed the outflow pipe from the SRX and used the outflow from my old petcock. It's a press fit.