Fuel line Routing

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
bogey
Posts: 150
Joined: Fri Dec 12, 2008 6:28 pm
Location: Skerries, Ireland

Fuel line Routing

#1 Post by bogey » Mon Jun 20, 2016 8:23 am

Hi All,

Anyone got some photos of the correct way to route the fuel lines from the fuel petcock to the carbs. Right side is pretty straight forward its the left side I'm finding a bit tricky. i have the lines that came off and a good idea where each bit is meant to go but no matter which way i configure, doesn't seem to quite fit right without squeezing or almost kinking something.

Br grateful for any help and particularly for a nice clear phot showing how it should be done.

Regards
B

bogey
Posts: 150
Joined: Fri Dec 12, 2008 6:28 pm
Location: Skerries, Ireland

Re: Fuel line Routing

#2 Post by bogey » Tue Jun 21, 2016 10:35 am

Hi All,

Found a thread with some pics I needed so sorted for now!

Regards

B

Bengt Weil
Posts: 224
Joined: Sat Aug 04, 2012 2:01 am
Location: Ventura, California

Re: Fuel line Routing

#3 Post by Bengt Weil » Sat Jan 21, 2017 2:52 pm

Any chance of providing the link for the thread with pictures showing the proper fuel line routing? Thanks!

bogey
Posts: 150
Joined: Fri Dec 12, 2008 6:28 pm
Location: Skerries, Ireland

Re: Fuel line Routing

#4 Post by bogey » Sun Feb 12, 2017 9:21 am

Hi,

Haven't been on for a while and did this a little while ago. I found the info by using the search function on this forum and then going through the threads, if I can find it I will get back and post it,

Regards

B

bogey
Posts: 150
Joined: Fri Dec 12, 2008 6:28 pm
Location: Skerries, Ireland

Re: Fuel line Routing

#5 Post by bogey » Sun Feb 12, 2017 9:37 am

Here is son=me info i found that might help;

http://www.rzrd500.com/500phpBB3/viewto ... ing#p60096" onclick="window.open(this.href);return false;

Regards

B

Bengt Weil
Posts: 224
Joined: Sat Aug 04, 2012 2:01 am
Location: Ventura, California

Re: Fuel line Routing

#6 Post by Bengt Weil » Sun Feb 12, 2017 12:56 pm

Thanks!!

Post Reply