rg500 carb parts
Moderator: rztom
-
- Posts: 8
- Joined: Wed Feb 14, 2018 4:22 pm
rg500 carb parts
Hello all, looking for a good repair or replacement carb for a broken float hanger leg that was glued, any thought would be appreciated
85rzv500
87rg500
85rz350
79-400f
10 Ducati 848 Nicki Hayden
79sr500
71 Penton six day 125
17 six day 450
70 ossa stiletto
72 CZ 250
77 Ossa Desert Phantom
78 Maico 250
18 CTS-V 640 hp
87rg500
85rz350
79-400f
10 Ducati 848 Nicki Hayden
79sr500
71 Penton six day 125
17 six day 450
70 ossa stiletto
72 CZ 250
77 Ossa Desert Phantom
78 Maico 250
18 CTS-V 640 hp
-
- - - - - -
- Posts: 100
- Joined: Fri Feb 12, 2010 3:47 pm
- Location: surrey u.k
Re: rg500 carb parts
Hi Doug have you thought about using lumi-weld to build stem up then carefully re-drilling hole for float pin do some research good luck with your quest regards bill
-
- Posts: 8
- Joined: Wed Feb 14, 2018 4:22 pm
Re: rg500 carb parts
Well thank you, sounds like a good repair
doug
doug
85rzv500
87rg500
85rz350
79-400f
10 Ducati 848 Nicki Hayden
79sr500
71 Penton six day 125
17 six day 450
70 ossa stiletto
72 CZ 250
77 Ossa Desert Phantom
78 Maico 250
18 CTS-V 640 hp
87rg500
85rz350
79-400f
10 Ducati 848 Nicki Hayden
79sr500
71 Penton six day 125
17 six day 450
70 ossa stiletto
72 CZ 250
77 Ossa Desert Phantom
78 Maico 250
18 CTS-V 640 hp
-
- - - - - -
- Posts: 3240
- Joined: Sat Feb 04, 2012 7:36 am
Re: rg500 carb parts
The proper way to repair a broken float post is to use a small pin and a product like JB Weld or similar. Drill a tiny hole in the broken post and the base and insert a pin and then JB Weld. The pin gives it strength, the JB Weld keeps it secure.