new RG500 owner wheel advice

[fozzy17]

Hi guys just bought a Rg500 to go with my tzr and rd500, after doing a little research am I right in thinking GSX600 wheels are a direct bolt on for this? apart from taking 11mm off cushdrive? and the front direct bolt on no mods at all?

[begbie]

3" front up to 98 gsx600f wheel fits with no mod's, I have one with new bearings and paint If you live in uk.
Rear needs machining and a bearing change to fit.
Get your self over to the RGV forum, as this is a well dicussed common mod.

http://www.rgv250.co.uk/forums/index.ph ... rg-series/" onclick="window.open(this.href);return false;

[fozzy17]

3" front up to 98 gsx600f wheel fits with no mod's, I have one with new bearings and paint If you live in uk.
Rear needs machining and a bearing change to fit.
Get your self over to the RGV forum, as this is a well dicussed common mod.

http://www.rgv250.co.uk/forums/index.ph ... rg-series/" onclick="window.open(this.href);return false;

thanks for info, how much you want for it, it comke with disks? any idea on what machining is needed?

[begbie]

As stock the wheels on an RG can be anything upto 10mm out of line !
Before you start make sure your frame, forks and arm are straight. Dont think because someone else had to machine 13mm from the spr carrier you should do the same.

[jzanutto]

I dont know how much help I can be but the RG I just bought has a GSXR conversion