A swedish wreck out on the roades again....

Good with a camera? Post pics of your favorite 2-stroke here!

Moderator: rztom

Message
Author
Jeppe500
Posts: 247
Joined: Wed Nov 17, 2010 6:44 pm
Location: Sweden - Stockholm

#31 Post by Jeppe500 » Tue May 22, 2012 12:57 pm

Ronnie wrote:I thought the bars were shortened by 8mm to give an increased ride height of about 37-40mm?
I mowed the holes....don´t remember how much.
I think I raised the rear approx 50 mm when changing the rearrim to 17".
The Honda damper was a little bit shorter then org so I had to redoit again.

Jeppe500
Posts: 247
Joined: Wed Nov 17, 2010 6:44 pm
Location: Sweden - Stockholm

Re: Wreck rides again

#32 Post by Jeppe500 » Tue May 22, 2012 1:06 pm

rich bullock wrote:That is one very good looking bike, nicely updated but retaining the original looks. Got to be one of the best looking paint schemes of any bike out there, sometimes the standard paint schemes are just so right.
Looks like the rear ride height has been increased, how much and how have you done this.
Rich.
Upgraded but retain the original look....thats my intension from start.
:smile:
The paintscheme is what you say...I like it to !

Regarding the looks of the bike....it´s no mintcondition restoration, but sure it is look good, doesn´t it !! :cool:

User avatar
Ronnie
- - - - -
- - - - -
Posts: 1574
Joined: Wed Nov 16, 2005 7:40 pm
Location: Newcastle upon Tyne, England

#33 Post by Ronnie » Tue May 22, 2012 1:13 pm

I think it was NK Racing that did the adjustable ride height kits. Check their site, it"s been a while since i looked.

User avatar
Andrew
- - - - -
- - - - -
Posts: 1333
Joined: Thu Nov 17, 2005 7:58 am
Location: Leicestershire. UK

#34 Post by Andrew » Wed May 23, 2012 8:56 am

My mod was a 10mm shock mount adjustment which equated to about 50mm ride height increase. :grin: :smt023
But 17inch rims and expansion chambers = no ground clearence. And after this 10mm mod, the pipes can still touch ground on a track day, so I'd recommend moving the shock mount at least 15mm backward.
I'd rather have a high backend than low.

And it also depends on your waistline and how much pre-load adjustment you have!!!
:cool:
Andy (UK)
RZV500R
FRC
Faster Faster !!!

User avatar
Ronnie
- - - - -
- - - - -
Posts: 1574
Joined: Wed Nov 16, 2005 7:40 pm
Location: Newcastle upon Tyne, England

#35 Post by Ronnie » Wed May 23, 2012 9:31 am

Andrew wrote:And it also depends on your waistline and how much pre-load adjustment you have!!! :cool:
i better move mine back 100mm then! :smt005

Jeppe500
Posts: 247
Joined: Wed Nov 17, 2010 6:44 pm
Location: Sweden - Stockholm

Re: Wreck rides again

#36 Post by Jeppe500 » Thu May 24, 2012 8:09 am

Was out riding last evening.....found this on the net afterwards.


Image // Jeppe
Last edited by Jeppe500 on Thu Feb 28, 2013 4:58 am, edited 4 times in total.

User avatar
aaronmvrider
Posts: 1401
Joined: Fri Nov 21, 2008 7:43 pm
Location: Central Coast New South Wales

#37 Post by aaronmvrider » Thu May 24, 2012 9:05 am

love the mirrors... what are they off....

great colour scheme on your bike looks really well done.....

i could just stare at my bike for hours and hours and look at all the different curves and components....

lifes good like that .... i am easily pleased.... :grin: :grin:
my rides
rz 500 1984
2 x rz 350 1984
mv agusta f4 1000 2004

Jeppe500
Posts: 247
Joined: Wed Nov 17, 2010 6:44 pm
Location: Sweden - Stockholm

#38 Post by Jeppe500 » Fri Jun 01, 2012 5:05 pm

aaronmvrider wrote:love the mirrors... what are they off....

great colour scheme on your bike looks really well done.....

i could just stare at my bike for hours and hours and look at all the different curves and components....

lifes good like that .... i am easily pleased.... :grin: :grin:
Hello aaronmvrider !

I just went to a bike/ scooter-retailer and looked at the bikes and scooters and looked out something that I thought would fit.
I think I got the mirrors from a Honda-scooter of some kind.
Pretty cheap was them, think I paid about 14-15Usd for both of them.
Did cut the arms to whay I thought would be right and welded them to the org arm with the mountingpiece that fit on the bike.
I think they fit the bike really well :D
// Jeppe

Jeppe500
Posts: 247
Joined: Wed Nov 17, 2010 6:44 pm
Location: Sweden - Stockholm

Re:

#39 Post by Jeppe500 » Mon Apr 01, 2013 5:07 pm

At last I took the bike out of the garage for the first time this year.
Still cold but atleast it is pretty warm in the sun.
Started up second kick, synked the carbs and then fitted the farings.
Nice sound....springtime :cool: !Image

Looks good and readyImage

// Jeppe

User avatar
2smoke
Posts: 662
Joined: Wed Apr 20, 2011 3:18 am
Location: Niagara, Ontario,Canada

Re: A swedish wreck out on the roades again....

#40 Post by 2smoke » Fri Apr 05, 2013 2:56 am

Love your bike.
I am using YZF750 forks on my current bike as well.
I am wondering why you have the forks sticking out of the top triple so far when the forks are already shorter than the originals?
Does it have something to do with the 17 inch rear wheel?
:smt001
Colin

Jeppe500
Posts: 247
Joined: Wed Nov 17, 2010 6:44 pm
Location: Sweden - Stockholm

Re: A swedish wreck out on the roades again....

#41 Post by Jeppe500 » Fri Apr 05, 2013 3:10 am

Thank´s 2smoke

Have been lowering the frontend bit by bit since I fitted the YZF-forks on the bike.
I wanted to get a more quick steering.....that´s all.
As it is now I can´t lower it more because of lack of clearence between front wheelfender and upper fairing when the fork is at max compression.

// Jeppe

cidair
- - - - -
- - - - -
Posts: 106
Joined: Sat Mar 09, 2013 5:28 pm
Location: Sweden

Re: A swedish wreck out on the roades again....

#42 Post by cidair » Sun Apr 07, 2013 5:46 pm

You're bike looks amazing!
I'm currently looking around to buy a RD 500. Not easy to find in Sweden.

Would be really nice to see You're bike IRL some time.
RD 500 1GE -87
RD 350A -73
TZR125RR 4DL -91
MT-09 -18
R1M -15
750 H2 -72

Jeppe500
Posts: 247
Joined: Wed Nov 17, 2010 6:44 pm
Location: Sweden - Stockholm

Re: A swedish wreck out on the roades again....

#43 Post by Jeppe500 » Mon Apr 08, 2013 4:08 am

cidair wrote:You're bike looks amazing!
I'm currently looking around to buy a RD 500. Not easy to find in Sweden.

Would be really nice to see You're bike IRL some time.
Well....
If you came by the region of Stockholm it might happen :cool:
//Jeppe

cidair
- - - - -
- - - - -
Posts: 106
Joined: Sat Mar 09, 2013 5:28 pm
Location: Sweden

Re: A swedish wreck out on the roades again....

#44 Post by cidair » Mon Apr 08, 2013 4:18 pm

Till salu?
RD 500 1GE -87
RD 350A -73
TZR125RR 4DL -91
MT-09 -18
R1M -15
750 H2 -72

Jeppe500
Posts: 247
Joined: Wed Nov 17, 2010 6:44 pm
Location: Sweden - Stockholm

Re: A swedish wreck out on the roades again....

#45 Post by Jeppe500 » Mon Apr 08, 2013 6:02 pm

cidair wrote:Till salu?
Sorry but no.... :smt002

Post Reply