A swedish wreck out on the roades again....
Moderator: rztom
Out riding
Well....
Been out riding during warm summer evnings.
Just great fun....
But seen this picture I got to change the mirrors....the´re ugly.
Been out riding during warm summer evnings.
Just great fun....
But seen this picture I got to change the mirrors....the´re ugly.
-
- Posts: 652
- Joined: Sat Apr 01, 2006 6:55 am
Re: Out riding
At last I´m done and the sun is shining !
Been doing some upgradings on the bike this winter (as usuall).
What has been done this time.....
-Reardamper been replaced with a Honda 600 RR reardamper fitted with a Öhlinsspring.
-Corrected spuishband to just under 1mm.
-Advaced ignition 4 degrees.
-Pods on ears.
-Rejetted with 220 mains and 25 pilot.
-Did a set of Ron Atchinson-needles and put them into the carbs.
-New mirrors mounted.
-Steeringdamper almost fitted....just the mount on frame to be done.
Been testing a bit and the bike preformce is just wonderfull.
No stubles at any rews, pulls hard from scratch and up to (and over) redline.
Been doing some upgradings on the bike this winter (as usuall).
What has been done this time.....
-Reardamper been replaced with a Honda 600 RR reardamper fitted with a Öhlinsspring.
-Corrected spuishband to just under 1mm.
-Advaced ignition 4 degrees.
-Pods on ears.
-Rejetted with 220 mains and 25 pilot.
-Did a set of Ron Atchinson-needles and put them into the carbs.
-New mirrors mounted.
-Steeringdamper almost fitted....just the mount on frame to be done.
Been testing a bit and the bike preformce is just wonderfull.
No stubles at any rews, pulls hard from scratch and up to (and over) redline.
Last edited by Jeppe500 on Thu Mar 07, 2013 6:13 pm, edited 2 times in total.
-
- Posts: 43
- Joined: Mon May 23, 2011 1:49 pm
- Location: Dauphin, Manitoba Canada
- Contact:
-
- Posts: 117
- Joined: Sun Nov 14, 2010 3:14 pm
- Location: Gloucestershire
Wreck rides again
That is one very good looking bike, nicely updated but retaining the original looks. Got to be one of the best looking paint schemes of any bike out there, sometimes the standard paint schemes are just so right.
Looks like the rear ride height has been increased, how much and how have you done this.
Rich.
Looks like the rear ride height has been increased, how much and how have you done this.
Rich.
Rich B
- Ronnie
- - - - - -
- Posts: 1574
- Joined: Wed Nov 16, 2005 7:40 pm
- Location: Newcastle upon Tyne, England
Possibly this one.
http://www.youngtimershop.at/Chassis/YA ... rease.html
I'm sure someone had an ajustable ride hight kit available. Can't remeber.
http://www.youngtimershop.at/Chassis/YA ... rease.html
I'm sure someone had an ajustable ride hight kit available. Can't remeber.
- Marsupilami
- - - - - -
- Posts: 162
- Joined: Sun Aug 23, 2009 8:24 am
- Location: Skåne, Sweden
I use the same method....did it with a little help from a local maschinist.Ronnie wrote:Possibly this one.
http://www.youngtimershop.at/Chassis/YA ... rease.html
I'm sure someone had an ajustable ride hight kit available. Can't remeber.
But it was hard to find how much the holes in the arms should be moved. I think I redid them 3 or maybe even 4 times.
The external tube on the damper caused same "small" problems to.
After I been testing the bike I feel like I would like to raise it a little bit more....most for the looks but even for little more quickhandling.
Ronnie: Look that adjustable ride hight kit up and send it over to me...Pronto
// Jeppe
Last edited by Jeppe500 on Tue May 22, 2012 12:55 pm, edited 1 time in total.