500 Two-Stroke Tech

very quikly !

i'm happy you like it
thanks a lot and keep us updated about project !

concerning paint scheme, i choice Gouloises, but was very undecided on Kocinki speed block or Taira tech21

_________________
Alex

These look perfect for a long term YZR 3MA project I'm building. It does use the stand 3MA bodywork, but would the stuff work too, or is the fairing too wide? I know your bike Alex is a widened 3MA derived frame, but any advice would be welcome.

I think i'ts quite wide than a 3MA fairing

tell more about your project
in next days I can take some dimensions (wide, lenght) of fairing and seat if you need

_________________
Alex

Here is a picture of the project as it stands.



This is what I'm aiming for



Thank you for you help. I still have to finish another project first, but hopefully start again on the YZR in the Summer.

Fairing is different but not impossble to obtain with some modification

upper cowl and hand guard are the same
you need to cut away and close external air duct
and flatten rear part of seat.

not easy but possible.

_________________
Alex

I also like this

these are exactly my parts

_________________
Alex

Hi There!
I'm new to the forum.
Will this fairing and seat fit the RZV500R?
Do you still make and sell it? Price to ship to USA Zip Code 95124?

I am planning on using the fairing I purchased from Alex on a custom framed bike, but I rough fit the belly-pan to my my RZ500 and it appears to be a decent fit. Alex has already cut the NACA duct to fit the RZ500 waterpump.

The bellypan has also been extended to fit a taller setup so the fairing should be easy to make fit to the RZ500 frame - I am going to trim it back to YZR500 dimensions.

The tail piece may require a little bit of work if you have fatter aftermarket pipes. The seat unit did not fit over the Jolly Moto upper pipes on my bike.

I have no idea how it will fit over stock upper pipes.

_________________
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZR250 3MA Track Bike
427ci C5 Z07

Interesting consideration RC45

I don't have possibilites to test fairing on stock RZ500 so, if you have some pictures, could be helpful to understand

_________________
Alex

bodywork are still in production
price ship to USA are between 800 and 900 euros,
it depends on payement method and shipping details

_________________
Alex

That's a nice tail!

I would like to see it used with the RZV500 frame. (If anyone has a photo, please post it.)

I'm hoping for a custom tail, but this tail is a good alternative.

Off topic: Any links to your latest projects? I need some motivation.

Hi Smoker

one set of fairing is directed in united states, one member want to put it on a stock rzv frame
we are all impatient to see how it fit and final result.

about my project
i had some big troble with my job and my mind goes far from bikes for a while
last winter i built an RGV-RG500 for a friend, almost ready now
and i'm still working on Bimota V2 aprilia framed project (for another friend)

step by step i'm trying to come back at my usual hobbies

_________________
Alex

Glad to hear you are getting back to what you like, and hearing that also motivates me.

I've also had some bad luck and am trying to heal and work on bikes.

Looking forward to seeing more of your great work!