Vendors can post special deals in here - Please, VENDORS ONLY
Moderator: rztom
-
Rick Lance
- Posts: 366
- Joined: Thu Nov 17, 2005 11:12 am
- Location: Leicester, NC
-
Contact:
#1
Post
by Rick Lance » Sun Feb 26, 2012 5:52 pm
I have produced several sets of new RZV shock linkage pivot bolts with bushing and end cap. These are required for a frame swap since the stock RZ bolt is too short. Rather than supplying just the bolt, I chose to have the kit be complete with all three components necessary for the job.
$125 including postage worldwide.
Contact Rick at
http://www.lancegamma.com to order.
PayPal is accepted.
![Image](http://i946.photobucket.com/albums/ad308/LanceGamma/LGRZVShockBolt02.jpg)
[/img]
Last edited by
Rick Lance on Mon May 19, 2014 1:18 pm, edited 1 time in total.
-
pstamper
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 1743
- Joined: Fri May 09, 2008 8:56 pm
- Location: Houston, Texas
#2
Post
by pstamper » Fri Mar 02, 2012 8:16 pm
Thanks for the bolt Rick, looks great.
-
s4oz
- Posts: 207
- Joined: Tue Jun 28, 2011 9:44 am
- Location: Melbourne, Australia
#3
Post
by s4oz » Tue Mar 20, 2012 11:54 pm
Same here, came through in the mail today.
One less little headache in the never ending search for bits.
Thank you.
-
ns86
- Posts: 833
- Joined: Sat Oct 30, 2010 9:46 pm
- Location: ontario canada
#4
Post
by ns86 » Fri Mar 23, 2012 11:12 am
Hi Rick, Mine arrived yesterday. Nice piece. Thanx
Last edited by
ns86 on Sun Oct 05, 2014 1:25 am, edited 1 time in total.
-
RC45
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 1713
- Joined: Fri Aug 19, 2011 5:18 am
- Location: Houston, Texas.
#5
Post
by RC45 » Fri Mar 23, 2012 12:53 pm
I guess I totally missed this thread.
I have been wondering when these bolt kits would surface - I almost gave up hope.
Hopefully you still have these available.
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
-
Rick Lance
- Posts: 366
- Joined: Thu Nov 17, 2005 11:12 am
- Location: Leicester, NC
-
Contact:
#6
Post
by Rick Lance » Mon May 19, 2014 1:21 pm
I have 4 of the linkage bolts left in stock. Anyone planning to use the RZV frame in an exchange for the steel unit may want to make sure they have one. I don't have any plans to make more.
If I disagree with everyone, that doesn't make me right. If I take the side of only one, it doesn't end the fight. If my position's strong enough from exposure to the light, you may see things my way when we share the same highway.
-
BigGuy
- - - - - -
![- - - - - - - - - -](./images/ranks/contributor_grey.gif)
- Posts: 312
- Joined: Mon Mar 07, 2016 6:55 pm
- Location: Maidstone, Ontario
#7
Post
by BigGuy » Sun Nov 27, 2016 11:30 am
Hi Rick, just wondering if by chance you have any more of these kits left? I know its been a while but I figured there was no harm in asking.
Thank you
Shake "N" Bake!
-
Eazy_ways
- Posts: 24
- Joined: Mon Aug 22, 2016 9:07 am
- Location: Perth Australia
#8
Post
by Eazy_ways » Thu Jun 22, 2017 8:22 am
Rick Lance wrote:I have 4 of the linkage bolts left in stock. Anyone planning to use the RZV frame in an exchange for the steel unit may want to make sure they have one. I don't have any plans to make more.
Hi rick
Do you have any of these kits left by any chance?
Thanks
-
FlyingBoat
- Posts: 82
- Joined: Sat Nov 09, 2019 6:17 pm
- Location: Florida USA
-
Contact:
#9
Post
by FlyingBoat » Mon Dec 16, 2019 11:12 pm
I have an RZV frame preparing to ship from Japan, I expect it to arrive in the coming weeks, no swingarm as yet, had been thinking an Aprilla RS 250 swing arm would be nice but until I find one an RZ swing arm is probably a lot easier to find.
1985 RZ500S Sold
1985 52X/RZV Project