Search found 32 matches

by Frenchship
Sun Jul 15, 2018 1:04 am
Forum: Bodywork
Topic: Chinese fairing beware
Replies: 20
Views: 4545

Re: Chinese fairing beware

I was installing the front cowling and it went on but when I try to attached the side panels I was like Mike about one inch from the air filter attach. I then removed the two rubber grommet (about 25 mm thick)from the top front cowling bracket,and now I can mount the side panel to the air filter it ...
by Frenchship
Sat Jul 14, 2018 12:20 am
Forum: Bodywork
Topic: Chinese fairing beware
Replies: 20
Views: 4545

Re: Chinese fairing beware

Mike,
That is close to what I received, but I agreed for every day used not bad at that price. Mike did you get the belly pan with the RZV 500 R sticker or the RZ 500 one.
by Frenchship
Wed Jul 11, 2018 6:01 pm
Forum: Bodywork
Topic: Chinese fairing beware
Replies: 20
Views: 4545

Chinese fairing beware

Hi, Just got my fairing from ZXGY MT on Aliexpress, not please at all,almost every panel need to be modified some quit a bit, colour is off (even after sending them sample) send me the belly pan with sticker from RZV instead of RZ. Try to open a dispute with them but no success, communication was re...
by Frenchship
Fri Jun 15, 2018 9:25 am
Forum: Bodywork
Topic: Right black luster on 47X-24756-00-2x
Replies: 2
Views: 1009

Re: Right black luster on 47X-24756-00-2x

Thank you, I really appreciate it.
Paul
by Frenchship
Wed Jun 13, 2018 10:38 am
Forum: Bodywork
Topic: Right black luster on 47X-24756-00-2x
Replies: 2
Views: 1009

Right black luster on 47X-24756-00-2x

Hi,
What would be the right black luster on 47X-24756-00-2X ?
Thanks
Paul
by Frenchship
Sun Mar 04, 2018 12:32 am
Forum: Engines
Topic: Power valves
Replies: 5
Views: 1323

Re: Power valves

Hi Ron,
Great Infos that will help quite a bit
Thanks
Paul
by Frenchship
Thu Mar 01, 2018 6:03 pm
Forum: Engines
Topic: Power valves
Replies: 5
Views: 1323

Re: Power valves

Bill & Michael, Thanks for the Infos, the seals are properly installed,so I will need to investigate further and took some measurement. I did noticed that the seals are pretty loose in some of the bushings Michael if I order new bushing I will send you the measurements. Thanks I really appreciat...
by Frenchship
Wed Feb 28, 2018 6:32 pm
Forum: Engines
Topic: Power valves
Replies: 5
Views: 1323

Power valves

Hi, Just finish rebuilding engine, while doing the leak down test the power valves are leaking badly even with new OEM seals and O rings, ( should have check more carefully) so two things the brass sleeves are bad or could it be the power valves themselves ? Do any body have the OD measurement of a ...
by Frenchship
Sat Dec 16, 2017 8:01 pm
Forum: Member's Rides
Topic: From The Garage
Replies: 51
Views: 10483

Re: From The Garage

Hi John,
Hope mine will look as good as yours when done.
Paul
by Frenchship
Mon Nov 13, 2017 1:35 pm
Forum: Engines
Topic: Mikita pistons
Replies: 2
Views: 1009

Re: Mikita pistons

Here is the answer from Yamabits in regard of the ring expander.Os that male sense..... Hi Paul, I have checked with our supplier, and if the pistons are not supplied with expander rings, they are not required. Those sets have a deeper bottom ring and are meant to run without the expander. I hope th...
by Frenchship
Mon Nov 13, 2017 1:45 am
Forum: Engines
Topic: Mikita pistons
Replies: 2
Views: 1009

Mikita pistons

Hi,
Just got front and rear Pistons .50 from Mikata (RZ500), it did not have the ring expander for the second ring. The rings are mark has TZR 125 looking at the parts books for that model it does not show a ring expander.
So no expander will that be a problem?
Thanks
Paul
by Frenchship
Tue Nov 07, 2017 8:22 pm
Forum: Electrical & Wiring
Topic: RZ 500 ignition switch
Replies: 2
Views: 988

Re: RZ 500 ignition switch

Exactly what I was looking for. Has I suspected I am missing the piece that engage the lock mechanism..
I did search the forum for that type of picture but could not find it.
Again John thank you so much.
by Frenchship
Tue Nov 07, 2017 10:31 am
Forum: Electrical & Wiring
Topic: RZ 500 ignition switch
Replies: 2
Views: 988

RZ 500 ignition switch

Hi,
Would anybody have the schematic or pictures of parts inside the ignition switch,specially the mechanism that activate the steering lock, mine was taking apart before and it seems to be missing some parts.
Thanks
Paul
by Frenchship
Sun Oct 15, 2017 5:56 pm
Forum: Engines
Topic: YPVS holder
Replies: 2
Views: 740

Re: YPVS holder

Thanks