What about posts 6 and 8?
Search found 169 matches
- Sat Sep 16, 2023 4:09 pm
- Forum: Engines
- Topic: Throttle stiff
- Replies: 10
- Views: 3688
Re: Throttle stiff
- Mon Sep 11, 2023 11:44 am
- Forum: Engines
- Topic: Throttle stiff
- Replies: 10
- Views: 3688
Re: Throttle stiff
I use a can of GT85 attached to one of those cable oiling blocks. Works well but there's always some leakage out of the block.
- Sun Sep 03, 2023 4:05 am
- Forum: Engines
- Topic: Emulsion Tubes
- Replies: 2
- Views: 1575
Re: Emulsion Tubes
They are listed on this forum somewhere.
Re: Oil light
Yeah, lots left when the light comes on.
- Fri Jul 07, 2023 2:53 am
- Forum: Electrical & Wiring
- Topic: Rev counter playing up
- Replies: 5
- Views: 1083
Re: Rev counter playing up
I had a similar issue. I found a new cable helped but didn't cure it completely.
- Sat Apr 29, 2023 4:20 am
- Forum: Engines
- Topic: 1984 RZ500
- Replies: 4
- Views: 1372
Re: 1984 RZ500
Hi Mike,
That's probably the neutral switch wire.
That's probably the neutral switch wire.
- Thu Apr 27, 2023 10:25 am
- Forum: Engines
- Topic: end of restauration
- Replies: 15
- Views: 4313
Re: end of restauration
Thanks for your answer. Someone can say me witch is the main air jet in the photo (#1.8 for upper cylinder ans #1.6 for lower cylinders) ? In red or in black ? or nothing ? The small jet at the right of the black circle is the pilot air jet https://zupimages.net/up/23/16/fi79.jpg Main air jet is in...
- Sat Apr 22, 2023 5:21 am
- Forum: Engines
- Topic: end of restauration
- Replies: 15
- Views: 4313
Re: end of restauration
Hi,
You definitely have clutch drag. Probably your lifting mechanism but could be a warped clutch plate.
Starting problem almost certainly a carb issue. You'll have to take them off clean and check them again. Maybe choke not working on those cylinders.
You definitely have clutch drag. Probably your lifting mechanism but could be a warped clutch plate.
Starting problem almost certainly a carb issue. You'll have to take them off clean and check them again. Maybe choke not working on those cylinders.
- Sat Oct 29, 2022 6:12 am
- Forum: Engines
- Topic: Gear selection probs.Help.
- Replies: 7
- Views: 1205
Re: Gear selection probs.Help.
You have clutch drag. Strip the clutch down and check it out. Could be worn fingers on the clutch basket or a warped plate. Just cleaning all the plates might help.
- Tue Aug 23, 2022 3:09 am
- Forum: For Sale
- Topic: * LOVELY 1984 RD500LC FOR SALE *
- Replies: 5
- Views: 1668
Re: * LOVELY 1984 RD500LC FOR SALE *
Thanks Jon
- Tue Aug 23, 2022 3:07 am
- Forum: For Sale
- Topic: * LOVELY 1984 RD500LC FOR SALE *
- Replies: 5
- Views: 1668
Re: * LOVELY 1984 RD500LC FOR SALE *
Thanks Jon
- Fri Jul 01, 2022 6:59 am
- Forum: For Sale
- Topic: * LOVELY 1984 RD500LC FOR SALE *
- Replies: 5
- Views: 1668
Re: * LOVELY 1984 RD500LC FOR SALE *
No-one been to see it yet. So I'm dropping the price to £18k Ono. Thanks.
- Mon Jun 27, 2022 6:58 am
- Forum: Engines
- Topic: 2-stroke oil lines prime
- Replies: 9
- Views: 1453
Re: 2-stroke oil lines prime
I just prime the tubes with a syringe before fitting them to the pump. Clear oil tubes do help.
- Sat May 21, 2022 6:56 am
- Forum: Wanted to Buy
- Topic: Steering Damper Fitting Kit For 31K
- Replies: 0
- Views: 6330
Steering Damper Fitting Kit For 31K
Hi,
I'm after a steering damper fitting kit for my 1983 RD350LC2. I believe all 350YPVSs would take the same kit and the frame is the same. Please let me kjw if you have one to sell or if you know where I could find one.
Linx
I'm after a steering damper fitting kit for my 1983 RD350LC2. I believe all 350YPVSs would take the same kit and the frame is the same. Please let me kjw if you have one to sell or if you know where I could find one.
Linx
- Sat May 14, 2022 10:10 am
- Forum: For Sale
- Topic: * LOVELY 1984 RD500LC FOR SALE *
- Replies: 5
- Views: 1668
* LOVELY 1984 RD500LC FOR SALE *
I have decided to sell my beloved RD500. Making room for another classic bike. It emigrated with its original owner from France in 2005. I've owned it for 5 years. It's not needed any major work in that time but I did get the frame powdercoated by Redditch Shot Blasting. I've fitted Ivans needles to...