500 Two-Stroke Tech

why not refit the stock cdi and measure the closed height ?
then you can remeasure it when you refit the zeel and match them up

early r6 fits on the clutch side . think it was 2001 , been a few years so cant remeber the exact year i bought
ive got a nissan master so unsure what you will get that fits that

hope it helps

you can still oem floats
needle will be fine unless its worn the coating off
any supplier that sells genuine jets will work as they should !

they did have clear protective strips on the frame rails , Thats what you will be seeing looks to be some residue left on there

are you going to soda blast the frame ? will that damage the anodizing ?

I have a yambits web on one of my cranks as one of the pins was pitted

I got the pin drilled . not a very easy task . but by the end it was the same weight as the stock web

think i put it on the bike in 2013

i dont see any issue , quality american made hose , fuel is far worse than glycol
yamaha would not put a special high tech hose standard ,

if your worried im sure you can parts fiche hunt down something qenuine and similar

motion pro Premium black fuel hose 1/4" id
single wall

job done !

ive used a few chinese ones in my cars and had 2 of them fail !

there are some threads about quality over on the 350 side

think its hit and miss . some people they work fine for and some they leak

that approach seems to explain it very well !
i did not see that post in my search

Thanks

one float started leaking all over the floor last night when i was have a play, no amount of soft hitting got it to stop , so ive ordered more floats and ill try the timing again when they turn up

hey guys few questions on checking static timing for my zeel unit current it set at 34 i have read some older posts and im still not understanding how to check it , one said degree wheel and dial indicator , just finding it a bit hard as only way to check with timing light is through the hole when r...

would have to look up part numbers . but what was the previous non window pistons origin ? Rz250 pistons a option aswell ? depends on pin height etc . but they have windows I have pistons in my bike now with cutouts but 2 10 mm holes above the arch heaps of meat left around there have 5k road kms an...

makita do them with windows for the 500 now . yam bits has them
tkrj do them aswell

just did a 80km ride with the zeel fitted
feels so much crisper now , move the open rpm to 9k
think just a more modern box with slightly different values helped

520 chain conversion is well worth it , R1 front sprocket and Rz350 rear

ive been having problems with my ypvs , been a real ass to figure out
few control boxes and servos , have a zeel now and it seems to be working . but now the stock control box is working
good point on the temp sender !

in trade we use 3M™ Panel Bonding Adhesive for fixing plastics like the 500 farings

3m do one for plastic repair but its not as good as the panel bond

on my 350 ive welded where i can and panel bond everywhere else , works very well , you will be hard pressed to find a better product