Search found 752 matches
- Sat May 15, 2021 8:53 am
- Forum: Bodywork
- Topic: Mirrors / Glass Removal
- Replies: 15
- Views: 2753
Re: Mirrors / Glass Removal
Is it possible to remove the glass to tighten the mirrors pivot? Not mine but from a group I use RZVR, mine on the left is a little loose and whilst hurtling along at ‘break neck’ speeds....it sags. Anyone know a tip on how to tighten the pivot up? Is it a glass out job?? Yes, gently warm the plast...
- Fri Mar 05, 2021 3:08 pm
- Forum: Vendors Forum
- Topic: Vin's Seat Unit
- Replies: 55
- Views: 26822
Re: Vin's Seat Unit
Hi guys, I would rather sell on the mould as it is just collecting dust here but it is a very robust unit and weighs a bit so postage to the states won't be cheap. However the potential return will pay for itself as l guess you may get more interest your end of the pond? I would take £150 plus posta...
- Fri Jan 08, 2021 5:14 pm
- Forum: Engines
- Topic: Rear Crank Timing out 2.5 Degrees
- Replies: 70
- Views: 10555
- Sat Oct 17, 2020 8:02 am
- Forum: Engines
- Topic: Jumping out of 1st gear and re engages
- Replies: 20
- Views: 4172
Re: Jumping out of 1st gear and re engages
I had a similar issue with my 500 and found that the thrust washer on the selector drum was omitted on the rebuild causing the selectors to make the bike jump out of first gear on load. Washer, Plate part number 90201-125L6 it replaces part number 90201-127E1 Unfortunately unless you remember fittin...
- Sun Sep 06, 2020 4:06 pm
- Forum: Bodywork
- Topic: Yamaha Tank Decal Number
- Replies: 2
- Views: 1381
Re: Yamaha Tank Decal Number
Many thanks Steve
- Sun Aug 30, 2020 8:40 am
- Forum: Bodywork
- Topic: Yamaha Tank Decal Number
- Replies: 2
- Views: 1381
Yamaha Tank Decal Number
Anyone know the part number for the "Yamaha" fuel tank decal on the 1GE red and white paint scheme?
Is it 47x-24161-00 superseded to 9924400120 black in colour?
Is it 47x-24161-00 superseded to 9924400120 black in colour?
- Sat May 30, 2020 9:16 am
- Forum: Engines
- Topic: The Keihin PWK28 Carb. Thread
- Replies: 68
- Views: 40459
Re: The Keihin PWK28 Carb. Thread
I tried to setup the bike with the stock airbox. Olli Hi Olli do the carbs fit in the elephant ears? You can fit KR1/S inlet rubbers to the ears with some modification to the rubbers, unfortunately I didn't get to trial fit to standard fairing as my project changed to fitting a yzr fairing. And unf...
- Thu Mar 19, 2020 7:35 pm
- Forum: Electrical & Wiring
- Topic: Dyna Tek Coils
- Replies: 16
- Views: 3582
Re: Dyna Tek Coils
[emoji106]tacky1 wrote:Ive been running mine for a good few years now Vin and still no probs, Bid bright spark at the plug,
Probably added 40HP, Feels good
Sent from my FIG-LX1 using Tapatalk
- Thu Mar 19, 2020 2:06 pm
- Forum: Electrical & Wiring
- Topic: Dyna Tek Coils
- Replies: 16
- Views: 3582
Re: Dyna Tek Coils
Any updates on these Dyna coils on performance or regrets/likes?
It is looking like l may need a set on my modified 500.
Or any better ones on the market?
Sent from my FIG-LX1 using Tapatalk
It is looking like l may need a set on my modified 500.
Or any better ones on the market?
Sent from my FIG-LX1 using Tapatalk
- Thu Mar 19, 2020 6:26 am
- Forum: Electrical & Wiring
- Topic: Pick up coil
- Replies: 6
- Views: 1837
Re: Pick up coil
Drop Zeeltronic a line l believe they can sort you out.
Sent from my FIG-LX1 using Tapatalk
Sent from my FIG-LX1 using Tapatalk
- Sat Mar 07, 2020 3:25 pm
- Forum: Electrical & Wiring
- Topic: Neutral Light Wire
- Replies: 6
- Views: 1332
Re: Neutral Light Wire
Genuine [emoji44]
Sent from my FIG-LX1 using Tapatalk
Sent from my FIG-LX1 using Tapatalk
- Sat Mar 07, 2020 3:16 pm
- Forum: Electrical & Wiring
- Topic: Neutral Light Wire
- Replies: 6
- Views: 1332
Re: Neutral Light Wire
I believe from memory that the thread insert is bonded into plastic so if it is spinning then l would suggest replacement. Even if you have to snip the terminal end and re-crimp a new one it isn't a problem. Not sure if still available from Yamaha but Yambits do a replacement. https://uploads.tapata...
- Wed Jan 15, 2020 9:32 am
- Forum: Vendors Forum
- Topic: Vin's Seat Unit
- Replies: 55
- Views: 26822
Re: Vin's Seat Unit
I have had a few more inquiries regarding making more seat units so again depending on numbers I can get new quotes. I may even offer for sale the actual mould if anyone is interested (cascade500 hasn't come back to me) £150 plus postage (mould is pretty robust so postage may be high if sending abro...
- Wed Dec 25, 2019 7:54 am
- Forum: Forum Alerts
- Topic: Merry Christmas 2019 !!
- Replies: 7
- Views: 1997
Re: Merry Christmas 2019 !!
Merry Christmas one and all [emoji106]
Sent from my FIG-LX1 using Tapatalk
Sent from my FIG-LX1 using Tapatalk
- Tue Dec 17, 2019 3:30 pm
- Forum: Custom Projects/Restoration
- Topic: RZV500R / YZR500 OWD1 Project
- Replies: 139
- Views: 25219
Re: RZV500R / YZR500 OWD1 Project
Very nice indeed [emoji41]
Sent from my FIG-LX1 using Tapatalk
Sent from my FIG-LX1 using Tapatalk